BarretinaHyperLite 2 paragliderssingle skin 19 m2 BHL2-19 "Alp'Skin" evolution 2017

Model	BHL2-19 "Alp'Skin"
Surface	19 m2
Flat span	9,70 m
Flat aspect ratio	5
Panels	33
Weight range	-
Anchors per rib	4, et 3 (near wingtip)
Risers	3
Certification	No

2. Data Files, DXF Plans, including technical improvements 2017

leparagliding.txt
Plans DXF 2D and 3D
Plans PDF Panels and ribs templates A4 PDF

3. Photos construction

1. 620 sheets A4	2. Drawings profiles on fabrics
3. Cutting panels	4. Color seams
4+. Profiles	5. Color seams
6. Panels	7. And more panels
8. Setting up ribs	9. Rib sewing
10. Last panel seams	11. Seeting nylon rods
12. "Alp'Skin"	14. Line sewing
15. All lines 565 gr	16. Setting 10 mm ring stabilo - trailing edge
17. Single skin 2017	18. Placement, trailing edge galon
19. First time outside	20. Magic-bag

Click on each photo to download in high resolution

Thanks to Thierry for sharing the details of his new prototype.

Construction

First test Col du Lautaret 2058 m

1er vol le 27 03 2017

Test ruptures

LAB NOTE: Build a paraglider at home is a very complicated task (even simple skin), and requires many hours of work. Previous experience is required, and very inventive. As always remember that: The free flight implies risks that can only be known and they can be controled with a suitable formation on the part of a recognized school. Not test wings without knowing their functioning. The construction and test of experimental wings without certifying requires deep knowledge of what is being made.

index