LABORATORI D'ENVOL PARAGLIDING 2.60 version "Les Escaules" by Pere Casellas 2010-2016 http://www.laboratoridenvol.com General Public License GNU/GPL 3.0 Brand: LABORATORI D'ENVOL Paraglider model: JouetBHL scale: 1.152 1. MAIN PARAMETERS: ------------------------------------------------- Flat area = 4.00 m2 43.1 ft2 Flat span = 3.68 m 12.1 ft Flat A/R = 3.38 Projected area = 3.47 m2 37.3 ft2 Projected span = 3.03 m 9.9 ft Projected A/R = 2.65 Flattening = .13 More geometric parameters: Vault arrow = .90 m Proj_span/arrow = 3.35 Line heigth (included risers) = 2.42 m Proj_span/Line_heigth = 1.46 Karabiners - wingtip = 1.90 m Proj_span/(Karabiners - wingtip) = 1.60 Wing type is: ss Planform center of gravity at 53.58 % from leading edge 2. CALAGE PROPERTIES: ------------------------------------------------- finesse GR 4.50 glide angle 12.53 AoA 9.40 assiette 3.13 total height hcp (inc risers) 242. cm risers 35. cm calage, pilot centering % cm 30.00 39.74 center pressure (estimation) cm 40.00 52.99 karabiners (x,y,z) 17.50 41.14 242.36 3. RIB PROPERTIES: ------------------------------------------------- Ribs number = 8 Cells number = 7 Rib - Chord - washin - beta ------------------------------------------------- 1 132.48 .000 7.82 2 117.95 1.097 26.14 3 88.63 3.310 45.84 4 42.49 10.000 89.43 Cell width (cm) 0 67.60 1 62.44 2 52.00 3 35.60 4. LINE MATRIX, LINE LENGTHS,AND LINE LOADS: Line-plan- level- order- ap - r - row - rib - L - length -length_e - load (Kg) -------------------------------------------------------------------------- 1 1 1 1 6 3 2 3 L = 35.00 35.00 32.26 2 1 2 1 2 3 2 1 L = 119.27 119.15 12.15 3 1 2 2 4 3 2 3 L = 105.61 105.44 20.11 4 1 3 1 1 3 1 1 L = 84.13 84.03 6.08 5 1 3 2 1 3 2 1 L = 84.67 84.57 6.08 6 1 3 3 1 3 1 2 L = 94.22 94.12 5.41 7 1 3 4 1 3 2 2 L = 93.30 93.20 5.41 8 1 3 5 1 3 1 3 L = 85.40 85.32 4.65 9 1 3 6 1 3 2 3 L = 86.67 86.59 4.65 10 2 1 1 8 3 3 4 L = 35.00 35.00 17.74 11 2 2 1 2 3 4 1 L = 128.67 128.61 5.21 12 2 2 2 3 3 3 3 L = 114.57 114.50 6.96 13 2 2 3 3 3 3 4 L = 89.92 89.88 5.57 14 2 3 1 1 3 3 1 L = 76.97 76.92 3.47 15 2 3 2 1 3 4 1 L = 81.11 81.08 1.74 16 2 3 3 1 3 3 2 L = 85.21 85.16 3.09 17 2 3 4 1 3 4 2 L = 87.65 87.62 1.55 18 2 3 5 1 3 3 3 L = 80.33 80.29 2.32 19 2 3 6 1 3 1 4 L = 91.85 91.81 2.23 20 2 3 7 1 3 2 4 L = 92.03 91.99 2.23 21 2 3 8 1 3 3 4 L = 96.94 96.92 1.11 22 3 1 1 3 3 6 3 L = 109.44 .00 .00 23 3 2 1 3 3 6 3 L = 8.14 .00 .00 24 3 3 1 1 3 6 1 L = 115.61 .00 .00 25 3 3 2 1 3 6 2 L = 98.10 .00 .00 26 3 3 3 1 3 6 3 L = 93.89 .00 .00 Total line lengths (without loops) = 41.88 Total line lengths (with loops) = 52.28 (estimation of 10 cm additional per loop) 5. Adjustment seam parameters on the inner side of extrados panels (fig. 10 of the manual) ------------------------------------------------- Not used ( ndif=1000 ) 6. VERIFICATION Panels and rib differences (mm): ------------------------------------------------- NOTE: Maximal accuracy << 0.02 mm in extrados and intrados panels Number - Panel at left - Rib - Panel at right - max dif (mm) 1 1548.19 1548.19 1548.19 .00 2 1378.43 1378.43 1378.43 .00 3 1035.81 1035.81 1035.81 .00 Panel distorsions in the leading edge (mm): ------------------------------------------- Panel D. extra D. intra 0 1.1155 .0000 1 29.7280 .0000 2 -.0283 .0000 3 -.0701 .0000