le

Barretina Hyper Lite 3
BHL3-a

1. Technical specifications

Model

BHL3-a

Surface

19 m2

Flat span

10.37 m

Flat AR

5.66

Panels

39

Weight range

-

Anchors per rib

4, and 3 (near tips)

Risers

3
Configuration
 classic "sawtooth" 4p/3p
airfoils reduced thickness 

Certification

No

2. Data and plans

Data leparagliding 2.41 input files: leparagliding.txt  bhl3-4p.txt  bhl3-3p.txt  bhl3-ta.txt
Pre-processor: lep-data.txt  geometry-out.txt geometry.txt.zip
Output files: lep-out.txt  lines.txt
CAD DXF2000 files: leparagliding.dxf.zip lep-3d.dxf.zip
(File paragliding.dxf still need some post-treatment process)

geometry
Figure 1. Basic geometry BHL3 (pre-processor)

Read more about BHL3 "X" project
Read more about the single skin development

LAB NOTE: Build a paraglider at home is a very complicated task , and requires many hours of work. Previous experience is required, and very inventive. As always remember that: The free flight implies risks that can only be known and they can be controled with a suitable formation on the part of a recognized school. Not test wings without knowing their functioning. The construction and test of experimental wings without certifying requires deep knowledge of what is being made.

index laboratori d'envol